Double Head Stone Engraving CNC Router

Product Description

The CO2 laser machine manufactured by Numac Hitech typically comes with various specifications depending on the model and application it is designed for. However, here's a general overview of the typical specifications that such a machine might have. For accurate specifications of a specific model, you should refer to the product's manual or Numac Hitech's official documentation.

1.   Laser Type:

1.  
   • CO2 laser (gas laser) typically using a mixture of carbon dioxide (CO2), nitrogen (N2), and helium (He) as the laser medium.

2.   Laser Power:

1.  
   • Common ranges: 40W, 60W, 80W, 100W, 150W, and 200W.
   • The power rating determines the cutting and engraving capacity.

3.   Laser Wavelength:

1.  
   • The standard wavelength for a CO2 laser is 10.6 micrometers (m), suitable for various materials like wood, acrylic, glass, fabric, rubber, and more.

4.   Cutting Area:

1.  
   • Cutting bed sizes can vary based on the model, but typically sizes include:
     • 300mm x 200mm
     • 600mm x 400mm
     • 1300mm x 900mm
     • Larger formats, depending on specific machine configurations.

5.   Maximum Cutting Thickness:

1.  
   • Material-dependent, but typically:
     • Acrylic: 10-25 mm
     • Wood: 15-25 mm
     • MDF: 10-25 mm
     • Leather: 5-10 mm
     • Depending on power and speed settings.

6.   Cutting Speed:

1.  
   • Adjustable, with typical ranges from 0-500 mm/s, again dependent on material, power, and thickness.

7.   Engraving Speed:

1.  
   • Similar to cutting speed, adjustable with a typical range from 0-1000 mm/s.

8.   Control System:

1.  
   • DSP Controller (Digital Signal Processor) is common in Numac Hitech machines for precise control of the laser head.
   • Compatibility with software like CorelDRAW, AutoCAD, and LightBurn.
   • Can interface via USB, Ethernet, or directly from a PC.

9.   Cooling System:

1.  
   • Water cooling system for heat dissipation, often using a CW-3000 or similar water chiller.

10.                Focusing Lens:

• Typically around 1.5" to 2" focal length lenses, which can be swapped depending on the cutting or engraving needs.

1. Max Travel Speed:

• Usually up to 30,000 mm/min, but variable depending on the setup.

1. Electrical Requirements:

• Voltage: 220V single-phase or 380V three-phase power supply depending on the machine's power rating